1.Overview
The 4K HDMI extender over IP or fiber optic cable is a solution for
audio, video and USB signal extension via Local Area Network (LAN)
or fiber optic cable. It can be used as audio, video and KVM
extender over IP and applied to point to point, point to
multi-point, multi-point to multi-point and screen wall broadcast
system controlled by USB, RS232, IR and configured the 4K HDMI &
USB over IP Extender by web browser. An easy installation system
built up with Giga Ethernet switch which has IGMP function and CATx
cable for extension or broadcast.
2.Features
- 4K UHD HDMI over IP or fiber optic extender
- USB 2.0 over IP extension for K&B, printer, touch screen and so
on
- RS232 bi-directional extension and RS232 control
- 4 bits switch for 16 stream channel selection
- Support Dolby True HD, DTS-HD Master Audio
- Support two way Wide Band IR extension (38khz-56khz)
- Transmit over single Cat5e/6 cable up to 120m
- Transmitter over Fiber Optical cable up to 60km (Single Mode)
- Networking environment under Giga Ethernet switch and CAT5e cable
- Point to point extension, Unicast, Multicast and Video Wall system
(Max 8x16)
- Output video rotation
- Output video partial enlargement
- HDCP 1.4 compliant
3. Applications
Remote OB Van/Truck Video Feeds
Broadcast Studio Camera Feeds
Long-haul Signal Transport
TV station/video conference
Lecture Hall Projector Connectivity
Medical/Surgical Room Broadcast
Small corporate campus video links
Building to Building video conference calling
4. Ordering Information
HDMI KVM Fiber Optic
Extender with USB and 4K resolution
FL37: 1-ch HDMI with embedded audio, USB, RS232, bidirectional IR,
single fiber, single mode, 2KM standard, stand alone. Use CATx
cable could be 120m
.
5. Specifications
| Performance |
| Protocol | TCP, UDP, RTSP, RTP, DHCP, IGMP, Multicast, IPV4 |
| Support Video format | 4K@30HZ, 1080P/1080i/720P/576P/576i/480P/480i |
| Support Audio format | Stereo 192Kbps |
| HDCP | Compliant |
| IR Frequency | 38 -56 KHZ |
| RS232 Baud rate | Default 115200bps, total 8 kinds optional |
| IP setting &Group ID setting |
| Default IP | Automatic allocation |
| Group ID | Group 00 ~ group 16 |
| Request for Switch/Router | Support IGMP, support DHCP |
| Connectors on Transmitter |
| Input | 1xHDMI Female port, 1xUSB B type |
| Output | 1x RJ45 output, 1x Fiber output |
| RS232 | Phoenix RS232 port |
| IR | 1x IR TX port; 1x IR RX port Support 38K-56KHz |
| Connectors on Receiver |
| Input | 1xRJ45 input, 1x Fiber input |
| Output | 1x HDMI Female port, 2x USB A type |
| RS232 | Phoenix RS232 port |
| IR | 1x IR TX port; 1x IR RX port Support 38K-56KHz |
| Environmental & Power Requirements |
| Operating temperature | -5 to +35 ℃ (+23 to +95℉) |
| Operating Humidity Range | 5 to 90%RH (No Condensation) |
| Power supply | DC 5V |
| Power consumption | Max 3 watt |
| Physical |
| Dimension | TX: 160x103.2x30mm ; RX: 160x103.2x30mm |
| Net Weight | TX: 472.8G ; RX:472.3G |
If any interest, please contact
Email: alston@fiberlinker.com Skype: alston224
